Grass Care
Contour tracking is three-dimensional, clean and fast.
- Both rotors are free to move independently of the chassis.
- Three-dimensional tracking over uneven ground, thanks to fully floating suspension that levels the swather both fore and aft and at right angles to the direction of travel.
- The tines always stay parallel to the ground, ensuring raking remains clean at any speed.
- A wide track with secure rotor suspension – the four- and six-wheel rotor chassis.
- Positioning close to the tines produces even and clean raking across the entire working width.
Six wheels.
The new LINER 3100 is fitted with a six-wheel chassis as standard. The LINER 2900, 2800 and 2700, and also the rear rotor of the LINER 4000, can be fitted with an optional six-wheel chassis (available through CLAAS parts). The additional suspended axles with the trailing steered wheels optimize contour tracking, and consequently the work and forage quality as well.
No.1 for lifting.
• When turning on headlands, the rotors raise high enough to
avoid disturbing the flat windrow with their rotating tines.
• When lowering, the rear wheels touch down before the front
wheels, preventing the tines from digging into the ground.
• Headland lifting of approximately 20 in (more than 500 mm)
makes it possible to run across the highest windrow.
• Automatically folding windrow guard for all center rakes.
