VOLTO Tedders

A wider spread.

With the VOLTO tedder range, CLAAS delivers modern technology in working widths of 17 - 42.6 ft (4.5 to 13.0 m) with trailed or three-point linkage attachment.

VOLTO tedders

VOLTO Tedders

A wider spread.

With the VOLTO tedder range, CLAAS delivers modern technology in working widths of 17 - 42.6 ft (4.5 to 13.0 m) with trailed or three-point linkage attachment.

Design.

VOLTO tedders

Intelligent drive train.

The innovative PERMALINK power flow transmission system is at the heart of the VOLTO.

  • Features low-wear, cast-steel components with large contact areas thanks to the flattened finger contact surfaces.
  • The system stays fully engaged when folding through 180° with reliable power flow in every situation.
VOLTO tedders

Enclosed drives.

Another highlight of the VOLTO 1320 T, 1100 T, 900 T, 800 and 800TH models is the hermetically sealed transmission running in low-viscosity grease and encased in rugged cast-iron housings.

  • Robust, durable, and maintenance-free.
  • Full-time rotor lubrication to handle heavy operation and provide excellent harvesting results.
  • No crop contamination following oil loss.
VOLTO tedders

Enormous stability.

The generously dimensioned connecting tubes between the individual rotors are angled at 45°. This angle absorbs torsional forces and the extra-large flange surfaces create additional strength for the bolted connections.

VOLTO tedders

Robust tine arms for heavy loads.

The circular tine arms are bolted to the extra-strong rotor plate. The reinforcement ring has recesses for each tine arm to provide extra strength. Thanks to their circular shape, the tine holders resist bending. Reliable tine guidance and fewer breakages are the result.

VOLTO tedders

Dependable ground tracking.

Extra-wide balloon tires ensure reliable ground-contour following, optimal soil protection and smooth running, even at high working speeds. The tires are protected against undesirable crop build-up.

VOLTO tedders

Enhanced safety through CKL (VOLTO 800 only).

The CKL power drawbar consists of a pair of telescopic arms fitted to the chassis. Spring-loaded braking cones built into the telescopic arms of the CKL system ensure safer running of the machine.

Direct transfer of machine weight to the lower linkage.

  • No torsional forces mean less wear on the three-point mounting.
  • Reduced loading on the carrier between tedder and three-point mounting.
  • Uniform contour following and constant working height of the tines.
  • Smooth field crossing regardless of width; no bouncing.
  • No tedder overrun on downhill slopes.
  • Automatic locking of the three-point frame for secure road transport with no need for additional transport locking device