QUADRANT 5300

The baler with more.

Perfectly formed 3 x 4 bales, with the new weighing system.

QUADRANT 5300

The baler with more.

Perfectly formed 3 x 4 bales, with the new weighing system.

CLAAS Square Balers | QUADRANT 5300 – the baler with more.

  • NEW: Hydraulically driven pick-up
  • NEW: Automatic Pressure Control (APC)
  • NEW: Knotter monitoring
  • NEW: Long 152 inch (3.85 m) bale chamber
  • Crop feed systems to suit a variety of needs: ROTO FEED,
  • ROTO CUT, FINE CUT
  • NEW: Integrated bale weighing system
  1. Bale size 47 x 35 in (1.2 x 0.9 m)
  2. Pick-up width 92.5 in (2.35 m)
  3. 2 oscillating pick-up castor guide wheels
  4. POWER FEEDING SYSTEM (PFS)
  5. NEW: Hydraulically driven feeder unit
  6. ROTO FEED
  7. ROTO CUT with knife drawer (25 knives)
  8. FINE CUT with knife drawer (51 knives)
  9. Adjustable hydraulic pre-chamber
  10. 46 ram strokes
  11. NEW: Automatic Pressure Control (APC)
  1. CLAAS Standard single knotters
  2. NEW: 6 CLAAS HD II single knotters
  3. NEW: Knotter monitoring
  4. TURBO FAN knotter cleaning system with air diffuser
  5. Eccentric needle control
  6. Moisture meter
  7. NEW: LED package
  8. NEW: Bale weighing system
  9. ISOBUS-compatible
  10. Automatic electric central lubrication system

NEW: Integrated bale weighing system.

The exact bale weight is displayed on the terminal of the QUADRANT models during working, and is saved to the customer job. After the job is completed it can undergo further processing.

  • All important data, e.g. weight, can be accessed via task management
  • Improve operating times, support the operator, optimize costs – all with remote access

Higher throughput.

The interactive drive protection system with integrated clutch in the transmission significantly boosts the torque transferred by the clutch (14% at the rotor, 13% at the feed rake) over the QUADRANT 3300. Both components (drive and clutch) are maintenance-free.

Automatic baling pressure control.

Optimum baling pressure at the push of a button: the automatic baling pressure control provides maximum operator convenience. Even less experienced drivers can easily operate the machine to its full capacity.

With knotter monitoring, everything is under control.

The automatic baling pressure control ensures total tying reliability. There are sensors on the knotter to monitor the twine tension, and sensors on the front frame to measure the bending forces. The system adjusts the baling pressure automatically according to the load. That means you can operate the baler right up to the limit, without the twine breaking. But if a breakage does occur, this is displayed by the knotter monitoring system. The knotter sensors also detect when a fresh supply of twine is needed, and a message is displayed on the terminal.

Specifications

  • Intake + crop feed
    QUADRANT5300 FINE CUT5300 ROTO CUT5300 ROTO FEED
    Pick-up width in (m)92.5 (2.35)92.5 (2.35)92.5 (2.35)
    POWER FEEDING SYSTEM
    Crop feedFINE CUTROTO CUTROTO FEED
    Number of knives5125
    Knife group selection51, 26, 25, 13, 12, 025, 13, 12, 6, 0

  • Baling channel + tying
    QUADRANT5300 FINE CUT

    5300 ROTO CUT

    5300 ROTO FEED
    Ram strokes(U/min)464646
    Bale chamber dimensions length x width x heightin (m)

    152 x 47 x 35

    (3.85 x 1.2 x 0.9)

    152 x 47 x 35

    (3.85 x 1.2 x 0.9)

    152 x 47 x 35

    (3.85 x 1.2 x 0.9)

    Bale lengthin (m)20 - 118 (0.5–3.0)20 - 118 (0.5–3.0)20 - 118 (0.5–3.0)
    Automatic baling pressure control
    Knotter monitoring
    Weighing system
    LED work lights

  • Control terminal
    QUADRANT5300 FINE CUT5300 ROTO CUT5300 ROTO FEED
    COMMUNICATOR II
    EASY on board
    ISOBUS cable

  • Running gear + Tires
    QUADRANT5300 FINE CUT530 ROTO CUT5300 ROTO FEED
    Single axle-710/40 R 22.5710/40 R 22.5
    Steered tandem axle500/55 R 20500/55 R 20500/55 R 20
    Steered tandem axle620/50 R 22.5620/50 R 22.5620/50 R 22.5

● Standard   ○ Optional   □ Avaliable   – Not available