Tractors

XERION 5000-4000

Increased Acreage. Longer hours. Larger Equipment. Higher Yields. The demands of today’s modern farm are constantly expanding. Now it’s time to meet the tractor, that meets those demands, head on! Introducing XERION. The powerful new 4x4 from CLAAS.

Tractors

XERION 5000-4000

Increased Acreage. Longer hours. Larger Equipment. Higher Yields. The demands of today’s modern farm are constantly expanding. Now it’s time to meet the tractor, that meets those demands, head on! Introducing XERION. The powerful new 4x4 from CLAAS.

Steering axles

XERION 5000-4000
  • Each axle is designed for loads up to 3,300 lbs (15 t) at 31 mph (50 km/h)*
  • No front wheel lead
  • Six different special steering programs
  • Axle oil cooled by two separate coolers
  • Tightest turning radius in its class

*Availability varies according to country

Steering programs

  • Remain active at the headland
  • Maximum speed of 12.5 mph (20 km/h) when a special steering program is activated
XERION 5000-4000

Standard steering program:

  • Combination of all-wheel and front-axle steering
  • From 5° steering lock on the front axle, the rear axle follows the front axle electrohydraulically
  • From 7.5 mph (12 km/h), continuous reduction in steering lock
  • Fully locked at 25 mph (40 km/h)
  • GPS steering only in standard steering mode
XERION 5000-4000

All-wheel steering:

  • Rear axle is steered at the same time as the front axle but in the opposite direction
  • Axles move simultaneously

Main application:

  • Typical field applications such as tillage and seeding
  • Highly maneuverable
XERION 5000-4000

Single-sided crab steering:

  • Rear axle moves diagonally to front axle
  • Rear axle controlled via the CMOTION

Main application:

  • All work on slopes
  • Ideal to prevent drift on sloping ground
XERION 5000-4000

Gentle mode (reduced crab steering):

  • Rear axle moves along a parallel track to front axle
  • 75% of steering lock can be used
  • Steering corrected by the steering wheel via the front axle (up to 4°)

Main application:

  • Slurry spreading
  • Minimizing the number of passes
XERION 5000-4000

Full crab steering:

  • Rear axle moves along a parallel track to front axle
  • Steering corrected directly via all-wheel steering
  • Can also be controlled via CMOTION

Main application:

  • Rolling work on silage pits