The fuel tanks on both combines were filled prior to harvesting and each machine was equipped with a Farmobile data logger. The CLAAS TRION 740 was optimized autonomously, the John Deere S770 was optimized by an experienced owner/operator.

Location: Southern Nebraska Corn Field

Yield: 230 bu/ac field average

Moisture: 14.6% field average

Machines compared:

• CLAAS TRION 740 with CLAAS 12-30 corn header
• John Deere S770 with John Deere C12R header

Key outcomes.

• 19% higher throughput with the CLAAS TRION 740.
• 41% less grain loss with the CLAAS TRION 740.
• 37% less fuel consumption with the CLAAS TRION 740.

Combine automation.

• The CLAAS TRION 740 makes an experienced operator out of all operators.

Every square foot of the field requires a unique strategy to minimize cost and boost profits. CEMOS AUTOMATIC artificial intelligence within the TRION 740 prescribes specific combine settings for each pass through the field. Throughout the comparison, this system achieved higher throughput with lower grain loss, even without added driver input or strain.

Throughput.

• 19% more combine capacity keeps operating costs to a minimum.

Allowing CEMOS AUTOMATIC to achieve a maximum ground speed set at 5.0 mph with CRUISE PILOT, the field was  harvested quicker in the TRION 740 than the JD S770. Across 100 acres, only 6.8 hours of operational time was needed on the TRION 740 with the JD S770 taking an additional 1.6 hours. A significant advantage of nearly a week’s time can be achieved with the TRION across 2,000 harvested acres.

Grain loss.

• 41% less grain loss puts more profit in the grain bin.

Allowing CEMOS AUTOMATIC to optimize threshing, separation, and cleaning settings, the TRION 740 achieved high throughput without sacrificing grain loss. Over 100 acres, the JD S770 averaged losses of 1.7% contrasted against 1.0% behind the TRION 740. Expanded across 2,000 harvested acres, this amounts to over two semi loads of corn lost compared to the TRION 740.

Fuel consumption.

• 37% less fuel consumption keeps the pocket book padded.

Allowing CEMOS AUTOMATIC to optimize combine throughput linked with machine capacity, the TRION 740 burned less fuel at 0.59 gallons per acre. The JD S770 averaged usage of 0.93 gallons per acre during the test. Expanded across 2,000 harvested acres, this amounts to nearly a full fuel trailer of added cost compared to the TRION 740.

Meaningful differences.

• $31,490 per year savings boosts the bottom line.

Across 2,000 acres, the TRION 740 offers significant savings in time, grain, and fuel. All of this can be accomplished with even the most inexperienced operator.

Learn More!

The latest model delivers even more, offering best-in-class performance right where four-wheel drive tractor customers need it with powertrain upgrades, improved hydraulic flow and added versatility. The high-horsepower (435-530 hp) tractor offers confidence-inspiring technology with a higher level of capability, ultimately helping customers work more productively and efficiently. Coinciding with the 25th anniversary of its global introduction, CLAAS celebrates the XERION’s past but keeps its eye to the future – and evolving customer needs.

“We designed the XERION to be our customers’ favored choice for true tractor capability,” said Frans Reijmers, CLAAS product manager of tractors for North America. “The enhancements to 2023 models build on its core strengths and provide the power, a better balance in the design and operator confidence that makes tackling those all-day, tough jobs more convenient than ever.”

The lineup experiencing enhancements in the new model year includes XERION 5000 and 4500 models in TRAC or TRAC VC configurations.

New Transmission, Proven Features.

Tackle steep terrain and experience a smoother ride with the all-new Eccom 5.5 continuously variable transmission (CVT). Like previous transmission technology (Eccom 4.5 and ZF Eccom 5.0), the Eccom 5.5 is also a 4-range CVT that better transfers the engine’s torque and power for superior efficiency and higher productivity. A maximum forward speed of 31 mph can be achieved at a low, fuel-saving rpm.

Industry’s Highest Hydraulic Power.

The switch to the new Eccom 5.5 enables higher hydraulic flow than not only just its predecessor, but also competitive brands. With up to six double-acting rear spool valves, a brand new pump transfer gearbox and optional tandem pumps allow an oil flow of up to 111 gallons per minute – more than sufficient hydraulic volume for implements with a particularly high oil flow requirement, such as wide air seeders. Up to two spool valves can be supplied with a high flow rate of 37 gallons per minute with standard load-sensing working hydraulics.

In addition, two spool valves (standard equipment) and three spool valves when equipped with the optional tandem pump can be prioritized in CEBIS. A separate and optimized 120 hp hydraulic system with 66 gallons per minute at 3,770 psi is available for attachments such as manure tanks and front-mounted implements requiring high-horsepower hydraulics. A hydraulic dual-circuit trailer brake can also be supplied for North American customers.

Increasing operator comfort even further, the hydraulics menu in CEBIS has also undergone modifications. At first glance, there is clarity on which feed pump supplies the available control units with oil and what maximum flow rates the control circuits allow. The prioritization and assignment of control units to function keys on the CMOTION joystick can also be done quickly and intuitively.

Intelligent Ballasting And Conveniences.

Also available in model year 2023 units is a new base weight plate for the multi-purpose carrier space behind the cab. Using the intelligent ballast concept with additional 882 Ib. weight plates and ballastable front weight, up to 15,432 Ibs. of additional ballast can be loaded. Depending on the application, the XERION can be optimally balanced for a 50:50 weight distribution under load for maximum multi-pass effect.

Also new is a quick hitch frame enabling a convenient change from Cat 3 to Cat 4/4N. The quick hitch fits the rear linkage of XERION and AXION high-horsepower tractors. Both the new basic weight plate and quick hitch can be used on older XERION tractors up to and including 2014 models.

Success In North America.

The CLAAS XERION has been available in Europe since 1997, and was introduced the North American market in 2014. Since its introduction, hundreds of XERION tractors have found a home on farms throughout key agricultural landscapes and CLAAS dealer locations have taken on the company’s growing tractor lineup, including the AXION 900 and 800 series tractors (200 - 440 hp).

In celebration of its 25th year in production, all model year 2023 XERION tractors will come with a limited edition anniversary sticker at time of delivery to North American customers.

In 2021, Duane Ditchens of Golden Valley Farms in the Willamette River Valley of Oregon had a chance to demo a LEXION 6000 Series machine in crimson clover. He walked away impressed!

See the Demo Video!

Industry Leading Throughput.

The LEXION 6800 and 6800TT are the most productive straw walker machines on the market - measured in terms of harvested area or tons per year. Even when operating in unfavorable conditions, they you can count on these machines to deliver maximum performance. So you can save time and fuel while operating more productively than ever before.

Superior Straw Quality.

Thanks to the straight crop flow of the APS SYNFLOW WALKER system, the LEXION 6800 eliminates sharp redirections of crop during threshing to prevent wrapping, maintain high separation force, and produce greater usable straw.

Excellent Fuel Savings.

The straight-line drive concept provides more efficient power transfer than gear driven systems, requires lower maintenance costs, and when paired with DYNAMIC POWER, uses up to 30% less fuel than the competition.

Capacity and Unload Speeds.

The LEXION 6800 grain handling system features the industry’s largest grain tank and fastest unload speed in a straw walker machine. Who wants to unload any more than is needed?

Ask your dealer about the LEXION 6800 combine today!

To be clear, there isn’t a lot of maintenance required on a DISCO mower. The most time-intensive task is changing the blades -- and even that chore requires only minutes compared to our competitors. Many DISCO mowers come equipped with a quick knife feature that utilizes a simple tool that releases and secures each knife in seconds. What could be easier?

Color-Coded Convenience.

All new DISCO mowers are now equipped with a color-coded knife system.

• All left-turning blades are now painted in the CLAAS-red color
• All right-turning blades will continue to be black
• The caps on each disc are painted to match the color of the corresponding blades to ensure proper installation
• A new knife box includes an additional compartment, for black, red and used blades, in order to keep everything organized

It’s a simple innovation. One you’ll be thankful for from your very first blade change!

Learn More!

Build + Price New Equipment          CLAAS Used Equipment Inventory

Have questions? Be sure to check with your CPA or tax expert about deductions and bonus depreciation, or go to irs.gov for specific instructions: Instructions for Form 4562 (2021) | Internal Revenue Service (irs.gov)